Magnetic writable wall coverings are a fantastic upgrade for high school classrooms, turning ordinary walls into interactive hubs for learning. The good news? Installing them is easier than you think! Follow this step-by-step guide to get a professional finish and maximize your classroom’s potential.
Step 1: Gather Your Supplies
Before you start, make sure you have everything you need: magnetic writable wall covering, a measuring tape, a utility knife, a smoothing tool (like a squeegee or credit card), and a level. You’ll also need cleaning supplies to prep the wall.
Step 2: Prep the Wall
Clean the wall thoroughly to remove any dust, grease, or residue. If the surface is uneven or textured, consider sanding it smooth. The cleaner and flatter the wall, the better the covering will adhere.
Step 3: Measure and Cut
Measure the area you want to cover and cut the wall covering to size. Leave an extra inch or two around the edges to ensure full coverage—you can trim it later for a clean finish.
Step 4: Apply the Covering
Peel off a small section of the adhesive backing and align the top of the covering with your wall. Slowly press it down while peeling more of the backing, smoothing out air bubbles as you go.
Step 5: Trim and Finish
Once the covering is fully applied, use a utility knife to trim any excess material along the edges. Check for air bubbles and smooth them out.
Step 6: Test It Out
Grab some markers and magnets to test your new writable wall—it’s ready for action!
With this quick and easy process, you’ll have a sleek, functional magnetic wall that’s perfect for dynamic high school classrooms.