Old whiteboards can make even the best classrooms feel outdated, but replacing them isn’t always in the budget. That’s where whiteboard resurfacing sheets come in—a quick, affordable way to give your boards a fresh start. Here’s a step-by-step guide to make the process smooth and stress-free.
Step 1: Gather Your Supplies
You’ll need resurfacing sheets, a cleaning solution or rubbing alcohol, a microfiber cloth, a smoothing tool (like a credit card or small squeegee), and a utility knife or scissors. Having everything ready before you start will save time.
Step 2: Prep the Surface
Start by cleaning the old whiteboard thoroughly. Use rubbing alcohol or a dedicated cleaner to remove all stains, ghosting, and residue. Make sure the surface is completely dry before moving on.
Step 3: Measure and Trim
Lay out the resurfacing sheet over the board and measure it to fit. Leave a little extra around the edges to trim later. Use scissors or a utility knife to cut the sheet to size.
Step 4: Apply the Sheet
Peel back a small section of the adhesive backing and align the sheet at the top of the board. Slowly press it down, peeling off more backing as you go. Use your smoothing tool to eliminate any air bubbles or wrinkles.
Step 5: Trim the Edges
Once the sheet is fully applied, trim any excess material along the edges with your utility knife for a clean finish.
Step 6: Test It Out
Grab some markers and test your new surface. It’s like having a brand-new whiteboard without the cost!
With this easy process, your high school boards will be ready to handle years of teaching and learning again.